JTAG Debugger	$895
Tool Features:    Run Control (Run, Stop, Breakpoints, Single Stepping) Memory Read/Write access)    RTOS Support    Support for Special Function Registers (SFRs)

Chip Feature overview:

• ARM720T
• 8KB Cache
• MMU
• High Performance (77.4 MHz)
• 32KB SRAM
• Clock and Power Management
• Color LCD Controller
• Flexible External Memory Interface
• DMA (four channels)
• Synchronous Serial Interface (SSI)
• Four Counter/Timers
• Two Pulse Width Modulators (PWM)
• Three UARTs with Classic IrDA
• Real Time Clock (RTC)
• Up to 64 General Purpose I/Os (5 V Tolerant)
• Programmable Vectored Interrupt Controller
• Watchdog Timer
• JTAG Debug Interface and Boundary Scan
• Low Power Modes
• Evaluation board from Sharp

Sharp: LH79524 / LH79525

Feature overview (preliminary):

• ARM720T
• Max CPU Clock: 70 MHz.
• 8KB cache
• MMU
• 10/100 BaseT Ethernet MAC
• USB 2.0 Full Speed Device
• Clock and Power Management
• Color LCD Controller
• Ten Input, 10-bit A/D Converter with Integrated Touch Screen Controller
• Four DMA Channels
• SDRAM Controller
• NAND Flash Support
• Serial Interfaces
• External Bus Interface
• Real Time Clock (RTC)
• LH79524: 88 GPIO, 8 GPI - LH79524: 72 GPIO, 8 GPI
• Three 16-bit Counter/Timers with Capture/Compare/PWM Capability
• Watchdog Timer
• Low Voltage Detector
• Evaluation board from Sharp

LH79524, compared to LH79525, has higher resolution graphics controllers, and wider external data bus (32 bits vs. 16 bits).