I want an Authorized
  Representative to
  contact me:


 Company Name

 Email Address

 Country or Area Code

 Phone Number

 Search for:

Philips: LPC210x - LPC2104, LPC2105, LPC2106

JTAG Debugger
ETM - Trace
LCP2106 Eval Board


Tool Features:

   Run Control (Run, Stop, Breakpoints, Single Stepping) Memory Read/Write access)
   RTOS Support

   Flash support for the Nohau® LPC2106
   Support for Special Function Registers (SFRs)

The LPC210x series offers 128 KB Flash and 16/32/64KB RAM in a tiny LQFP48 package.

Chip Feature overview:
  • 16/32 bit ARM7TDMI-S processor
  • 16/32/64 kB on-chip Static RAM
  • 128 kB on-chip Flash Program Memory. 128 bit wide interface/accelerator enables high speed 60 MHz operation
  • In-System Programming (ISP) and In-Application Programming (IAP) via on-chip boot-loader software. Flash programming takes 1 ms per 512 byte line. Single sector or full chip erase takes 400 ms
  • Vectored Interrupt Controller with configurable priorities and vector addresses
  • EmbeddedICE-RT interface enables breakpoints and watchpoints. Interrupt service routines can continue to execute whilst the foreground task is debugged with the on-chip RealMonitor software
  • Embedded Trace Macrocell enables non-intrusive high speed real-time tracing of instruction execution
  • Multiple serial interfaces including two UARTs (16C550), Fast I²C (400 kbits/s) and SPI
  • Two 32-bit timers (7 capture/compare channels), PWM unit (6 outputs), Real Time Clock and Watchdog
  • Up to thirty-two 5 V tolerant general purpose I/O pins in a tiny LQFP48 (7 x 7 mm2 ) package
  • 60 MHz maximum CPU clock available from programmable on-chip Phase-Locked Loop
  • On-chip crystal oscillator with an operating range of 1 MHz to 30 MHz
  • Two low power modes, Idle and Power-down
  • Processor wake-up from Power-down mode via external interrupt
  • Individual enable/disable of peripheral functions for power optimization
  • Dual power supply:
    • CPU operating voltage range of 1.65 V to 1.95 V (1.8 V +-8.3pct).
    • I/O power supply range of 3.0 V to 3.6 V (3.3 V +-10pct) with 5 V tolerant I/O pads.
Support: support@icetech.com
Sales: sales@icetech.com
Ice Technology, 430 Peninsula Ave, Suite 6, San Mateo, CA 94401
Ph:1-800.68.NOHAU (1-800-686-6428) or (650) 375-0409 - Fax:(650) 375-8666
Ice Technology, 1324 White Oaks Road, Campbell, CA 95008
Ph: (408) 626-7893 - Fax: (408) 626-9473
Nohau® , Seehau, EMUL51-PC, EMUL68-PC,EMUL-ST10/SUPER10/C166S V2-PC, EMUL12-PC, EMUL-and EMUL-ARM-PC are trademarks of Ice Technology a dba of Enable Engineering Co., Inc.. Other products and brand names are trademarks or registered trademarks of their respective holders.